Eq 3 Thermostat head 5 up to 29.5 °C Thermostatic L valve 130809 Hoja De Datos
Los códigos de productos
130809
50
50
19. Setting the offset temperature
Since the temperature is measured at the radiator, it can
be colder or warmer at another location in the room. In or-
der to equalise this, a temperature offset of +/- 3.5 °C can
be set. If for example 18 °C is measured instead of the set
20 °C, then an offset of -2.0 °C is to be set.
To set the offset temperature proceed as follows:
• Press the Menu key longer than 3 seconds.
• Select the „OF“ menu item with the selector dial and con-
firm with the OK key
• Turn the selector dial for as long as necessary until the
desired temperature appears.
• Confirm with the OK key.
20. Restoring the factory settings
The status of the programmable radiator control unit can
be manually restored by means of a reset to that when ori-
ginally supplied. This means that all the manually perfor-
med settings are lost.
Follow these steps:
• Hold the Menu key pressed down for longer than 3 se-
conds.
• Select the „RES“ menu item with the selector dial and con-
firm with the OK key. „CFM“ then appears in the display.
• „CFM“ then appears in the display.
• Confirm with the OK key.