Voltcraft LED table lamp IM859 Silver IM859 Hoja De Datos
Los códigos de productos
IM859
LED lamp IM859
Version 09/10
Item no. 88 35 17
Intended Use
1.
The LED of the lamp emit a soft white light. The lamp can also be used as a colour-changing aquarium. It is
only authorised for dry indoor use and is powered by a 5 V/DC power adaptor.
Unauthorised conversion and/or modification of the device are inadmissible because of safety and approval
reasons (CE). Any usage other than described above is not permitted and can damage the product and lead to
associated risks such as short-circuit, fire, electric shock, etc. Please read the operating instructions thoroughly
and keep them for further reference.
Delivery Content
2.
LED lamp
•
Power adaptor
•
Operating instructions
•
Safety instructions
3.
We do not assume liability for resulting damages to property or personal injury if the
product has been abused in any way or damaged by improper use or failure to observe
these operating instructions. The warranty/ guarantee will then expire!
The icon with exclamation mark indicates important information in the operating
instructions. Carefully read the whole operating instructions before operating the device,
otherwise there is risk of danger.
Persons / Product
The product is not a toy and should be kept out of reach of children!
•
When used in conjunction with other devices, observe the operating instructions and safety notices of
•
connected devices.
The product must not be subjected to heavy mechanical stress.
•
The product must not be exposed it to extreme temperatures, direct sunlight, intense vibration, or
•
dampness.
Miscellaneous
Servicing, adjustment or repair works must only be carried out by a specialist/ specialist workshop.
•
If any questions arise that are not answered in this operating instruction, contact our Technical Advisory
•
Service or other experts.
Operation
4.
Connect the power adaptor to the mains outlet.
1.
Connect the output plug of the power adaptor to the socket at the base of the lamp.
2.
Set the switch to position I to turn on the colour changing LEDs at the bottom of the lamp. The lamp now
3.
works as a colour-changing aquarium.
Set the switch to position II to turn on the white LEDs at the top of the lamp. Pull out the top part of the lamp
4.
and adjust it to the desired angle and position.
Set the switch to position 0 to turn the lamp off.
5.
Disconnect the power adaptor from the mains outlet when you do not use the lamp.
6.
Cleaning
5.
Use a dry and lint-free cloth to clean the product. For stronger contamination, use a cloth that is slightly
moistened with lukewarm water.
Disposal
6.
In order to preserve, protect and improve the quality of environment, protect human health and
utilise natural resources prudently and rationally, the user should return unserviceable product to
relevant facilities in accordance with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately and not as
municipal waste.
Technical data
7.
General
Operating voltage:
5 V/DC
Current consumption:
210 mA (lamp), 70 mA (colour LED)
Operating temperature:
-5 to +50 ºC
Number of LEDs:
24 (lamp), 1 (colour LED)
Dimensions (W x H x D): 131 x 242 x 101 mm
Weight:
670 g
Power supply
Input voltage:
230 - 240 V/AC, 50 Hz
Input current:
max. 35 mA
Output voltage:
5 V/DC
Output current:
max. 500 mA
Plug size (ø):
5.5 mm (outer) / 2.5 mm (inner)
LED-Standleuchte IM859
Version 09/10
Best.-Nr. 88 35 17
Bestimmungsgemäße Verwendung
1.
Die LEDs der Standleuchte strahlen ein weiches, weißes Licht aus. Die Standleuchte kann auch als
farbwechselndes Aquarium benutzt werden. Sie darf nur in trockenen Innenräumen verwendet werden. Die
Spannungsversorgung erfolgt über ein 5 V/DC Netzteil.
Aus Sicherheits- und Zulassungsgründen (CE) ist das eigenmächtige Umbauen und/oder Verändern des
Produktes nicht gestattet. Eine andere Verwendung als oben beschrieben ist nicht erlaubt und kann zur
Beschädigung des Produkts führen. Darüber hinaus ist dies mit Gefahren, wie z. B. Kurzschluss, Brand,
Stromschlag usw. verbunden. Lesen Sie die Bedienungsanleitung genau durch und bewahren Sie diese für
späteres Nachschlagen auf.
Lieferumfang
2.
LED-Standleuchte
•
Netzteil
•
Bedienungsanleitung
•
Sicherheitshinweise
3.
Bei Schäden, die durch Nichtbeachten dieser Bedienungsanleitung verursacht werden,
erlischt die Gewährleistung/Garantie! Für Folgeschäden übernehmen wir keine Haftung!
Bei Sach- oder Personenschäden, die durch unsachgemäße Handhabung oder
Nichtbeachten der Sicherheitshinweise verursacht werden, übernehmen wir keine
Haftung. In solchen Fällen erlischt die Gewährleistung/Garantie.
Wichtige Hinweise, die unbedingt zu beachten sind, werden in dieser Bedienungsanleitung
durch das Ausrufezeichen gekennzeichnet.
Personen / Produkt
Das Produkt ist kein Spielzeug und sollte von Kindern ferngehalten werden!
•
Beachten Sie auch die Sicherheitshinweise und Bedienungsanleitungen der übrigen Geräte, die an das
•
Gerät angeschlossen werden.
Das Produkt darf keinem starken mechanischen Druck ausgesetzt werden.
•
Das Produkt darf keinen extremen Temperaturen, direktem Sonnenlicht, starken Vibrationen oder
•
Feuchtigkeit ausgesetzt werden.
Sonstiges
Wartung, Anpassungs- und Reparaturarbeiten dürfen nur von einem Fachmann bzw. einer Fachwerkstatt
•
durchgeführt werden.
Sollten Sie noch Fragen haben, die in dieser Bedienungsanleitung nicht beantwortet werden, so wenden
•
Sie sich bitte an unseren technischen Kundendienst oder andere Fachleute.
Betrieb
4.
Schließen Sie das Netzteil an eine Steckdose an.
1.
Verbinden Sie den Ausgangsstecker des Netzteils mit der Buchse am Lampenfußes.
2.
Stellen Sie den Schalter auf Position I, um die farbwechselnden LEDs im unteren Bereich der Standleuchte
3.
einzuschalten. Die Standleuchte wird nun als farbwechselndes Aquarium betrieben.
Schalten Sie den Schalter auf Position II, um die weißen LEDs im oberen Bereich der Standleuchte einzuschalten.
4.
Ziehen Sie den oberen Teil der Standleuchte heraus und stellen Sie diesen auf die gewünschte Position und den
gewünschten Winkel ein.
Stellen Sie den Schalter auf Position 0, um die Standleuchte auszuschalten.
5.
Ziehen Sie das Netzteil aus der Steckdose, wenn Sie die Standleuchte nicht benutzen.
6.
Reinigung
5.
Benutzen Sie ein trockenes, faserfreies Tuch zur Reinigung des Produkts. Bei stärkerer Verschmutzung ist ein
mit lauwarmem Wasser leicht angefeuchtetes Tuch zu verwenden.
Entsorgung
6.
Im Interesse unserer Umwelt und um die verwendeten Rohstoffe möglichst vollständig zu
recyclen, ist der Verbraucher aufgefordert, gebrauchte und defekte Geräte zu den öffentlichen
Sammelstellen für Elektroschrott zu bringen.
Das Zeichen der durchgestrichenen Mülltonne mit Rädern bedeutet, dass dieses Produkt an einer
Sammelstelle für Elektronikschrott abgegeben werden muss.
Technische Daten
7.
Allgemein
Betriebsspannung:
5 V/DC
Stromverbrauch:
210 mA (Lampe), 70 mA (Farbe LED)
Betriebstemperatur:
-5 bis +50 ºC
Anzahl der LEDs:
24 (Lampe), 1 (Farbe LED)
Abmessungen (B x H x T) : 131 x 242 x 101 mm
Gewicht:
670 g
Netzteil
Eingangsspannung:
230 - 240 V/AC, 50 Hz
Eingangsstrom:
max. 35 mA
Ausgangsspannung:
5 V/DC
Ausgangsstrom:
max. 500 mA
Steckergröße (ø):
5,5 mm (außen) / 2,5 mm (innen)
Diese Bedienungsanleitung ist eine Publikation der Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau.
Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z. B. Fotokopie, Mikroverfilmung,
oder die Erfassung in elektronischen Datenverarbeitungsanlagen, bedürfen der schriftlichen Genehmigung des
Herausgebers. Nachdruck, auch auszugsweise, verboten.
Diese Bedienungsanleitung entspricht dem technischen Stand bei Drucklegung.
Änderungen in Technik und Ausstattung vorbehalten.
© 2010 by Conrad Electronic SE.
V1_09/10_02-HL
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture
in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is
prohibited.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical or physical specifications.
© 2010 by Conrad Electronic SE.
V1_09/10_02-HL