Voltcraft Kitchen furniture, work lights DF-3624 Silver-grey Built-in LED DF-3624 Hoja De Datos

Los códigos de productos

DF-3624

OPERATING INSTRUCTION

WWW.ROLUX-LEUCHTEN.DE

LED-Under Cabinet Light with Sensor
Model number: DF-3624 2,5W

30cm

3008300135

Model number: DF-7224 5W

60cm

3008300137

Please read the instructions before you mount the LED-
Light.

Contents



1x LED-Under Cabinet Light DF-3624 / DF-7224



1x LED-Converter 6W, 24V with Euro Power Plug



Installation materials



Operating Instruction

Intended Use

The product is used for lighting in furniture, kitchens or living
rooms.

The product is to be used only in dry indoor locations. It
must not get damp or wet.

Any use other than that described above will damage the
product and may involve other risks.

The guarantee is rendered invalid when damage occurs as a result of non-
compliance with the operating instruction! We do not assume any liability
for any damage arising as a consequence!

We do not assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instruction. Any
warranty claim will be invalid in such cases!



The unauthorized conversion and/or modification of the product is
inadmissible because of safety and approval reasons (CE). Never
dismantle the product.



This product is only to be installed and used indoors in dry conditions.
The product must be protected from damp and wet as there is risk of a
fatal electric shock!



Never look, directly or indirectly, into the light from the Illuminations,
the high intensity light may cause eyes injuries.



Do not expose the product to strong mechanical stress. Do not expose it
to high (>40°C) or low (<0°C) temperatures, strong vibrations or direct
sunlight.

Mounting

1. Set and mark the mounting space with the help of a ruler.

2. Place the mounting plate to the centre of the line with the

mounting brackets facing forwards, and fasten these in
place using the screws included in the delivery.

3. You have two options for installing the under Cabinet

lamp supply cable:



The supply cable is guided into the wall from beneath
the mounting surface



The supply cable is guided out via a drill hole in the
fixing surface. ! Drill hole for the DC supply cable min.
10mm!

4. Push the back end of the lamps onto the plate mounting

edge until secure, and then carefully push the lamp onto
the mounting clips.

5. Push the back end of the lamps onto the plate mounting

edge until secure, and then carefully push the lamp onto
the mounting clips.

Connection and initial start-up



Connect the lamp to a proper mains power socket
(230V~/50Hz) via the LED safety converter with Euro
mains plug.



Switch lamp on and off by moving your hand in front of
the sensor with a vertical motion (sensor range 10-
50mm).

Dismounting

1. Switch lamp off and remove the power supply (pull mains

plug).

2. Push the lamp in the mounting edge direction first, so that

its connection with the mounting clips is loosened. You
may now fold the lamp forward and remove it from the
mounting plate.

Care and maintenance

Turn off the Lamp before clean and disconnect it from the
power supply (Pull the Power Plug)!

Apart from occasionally cleaning the product, it is maintenance free, never
decompose the product.

Disposal

When the product is no longer usable, dispose it in accordance
with the applicable statutory regulations.

Technical Data

Model DF-3624

Model DF-7224

Operating Voltage:

230V~/50Hz

Power:

2,5W

Light color:

warm white 3.200K

Number of SMDs:

36 Stk.

72 Stk.

Length:

300mm

600mm

Width:

36mm

Height

11,5mm

LED converter:

6W, 24V