Panasonic TH-65PF10EK Manual De Usuario

MULTI DISPLAY Setup

Off

Off

MULTI DISPLAY Setup

Horizontal Scale 
Vertical Scale
Seam hides video

A1 

Location

× 2 
× 2 

AI-synchronization

Off

You can set the remote control ID when you want to use this remote control on one of several different displays.

Switch 

 to 

 on the right side.

Press the 

 button on the remote control.

Press one of 

 - 

, 

 for the tens digit setting.

Press one of 

 - 

, 

 for the units digit setting. 

Notes:
•  The numbers in 2, 3 and 4 should be set up quickly.
•  Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the fi rst two numbers become the ID number for the remote 

control.

Press 

 button on remote control. (This has the same effect as pressing the 

, 

, 

 buttons at the same time.)

Notes:
•  Set the Remote ID “On” to operate the ID remote control.
  If remote ID is set to “On”, you can use the remote control without identical ID number during option menu display. 
  (see page 47)
•  The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is 

not the same as the ID select number (see page 47).

The operation is the same as normal remote control except for the 

 button.

Press to select AI-synchronization.

Press to select “Off” , “On”.

Adjusts brightness of displays when using MULTI DISPLAY.

The brightness depends on 

each display’s setting.

Equalize the brightness of 

all the displays.

Off

On

Note:
If you set AI-synchronization to On, the following menus will be unavailable and these settings will be fi xed to the initial 
values.
Picture menu: Colour, Hue

Press twice to exit from Setup.