ECS K8M800-M2 K8M800-M2 (V2.0) Manual De Usuario
Los códigos de productos
K8M800-M2 (V2.0)
11
Installing the Motherboard
ATX_POWER: ATX 20-pin Power Connector
1
+3.3V
11
+3.3V
2
+3.3V
12
-12V
10
+12V
20
+5V
3
Ground
13
Ground
4
+5V
14
PS ON#
5
Ground
15
Ground
6
+5V
16
Ground
7
Ground
17
Ground
8
PWRGD
18
-5V
9
+5VSB
19
+5V
Pin
Signal Name
Pin
Signal Name
Front Panel Header
The front panel connector (PANEL1) provides a standard set of switch and LED header
commonly found on ATX or micro-ATX cases. Refer to the table below for information:
commonly found on ATX or micro-ATX cases. Refer to the table below for information:
Pin Signal Name Function
1
HD_LED_P Hard disk LED(+) 2
FP PWR/SLP *MSG LED(+)
3
HD_LED_N Hard disk LED(-)
5
RST_SW_N Reset Switch(-)
7
RST_SW_P
Reset Switch(+)
9
RSVD
Reserved
4
FP PWR/SLP *MSG LED(-)
6
PWR_SW_P Power Switch(+)
8
PWR_SW_N Power Switch(-)
10 Key
No pin
* MSG LED (dual color or single color)
Pin Signal Name Function
Hard Drive Activity LED
Connecting pins 1 and 3 to a front panel mounted LED provides visual indication that data
is being read from or written to the hard drive. For the LED to function properly, an IDE
drive should be connected to the onboard IDE interface. The LED will also show activity
for devices connected to the SCSI (hard drive activity LED) connector.
is being read from or written to the hard drive. For the LED to function properly, an IDE
drive should be connected to the onboard IDE interface. The LED will also show activity
for devices connected to the SCSI (hard drive activity LED) connector.
Power/Sleep/Message waiting LED
Connecting pins 2 and 4 to a single or dual-color, front panel mounted LED provides power
on/off, sleep, and message waiting indication.
on/off, sleep, and message waiting indication.