Reely QuadroCopter combi-board 450 + 650 208944 208944 Hoja De Datos
Los códigos de productos
208944
5
5. Product Description
The electronics are not protected from moisture and other environmental influences
and must only be used inside the model. The inputs and outputs are provided by
common plug connections or to be connected via the included cables.
and must only be used inside the model. The inputs and outputs are provided by
common plug connections or to be connected via the included cables.
The “QC08” combiboard is an electronics PCB ready for operation that enables different func-
tions in a model.
tions in a model.
1. Use of a common RC receiver for composite signal-controlled models such as the
QuadroCopter.
With a common receiver, a separate control signal is generated for each servo and sent to the
respective servo plug contact at the receiver. The composite signal converter on the combiboard
reassembles the different servo impulses and outputs them as a serial composite signal. Up to
8 channels can be used for formation of the composite signal.
The combiboard can be connected directly to the LiPo flight battery (3s1p) and then supplies the
receiver connected to the composite signal converter with a direct voltage of 5 V/DC.
respective servo plug contact at the receiver. The composite signal converter on the combiboard
reassembles the different servo impulses and outputs them as a serial composite signal. Up to
8 channels can be used for formation of the composite signal.
The combiboard can be connected directly to the LiPo flight battery (3s1p) and then supplies the
receiver connected to the composite signal converter with a direct voltage of 5 V/DC.
2. Control of light effects and displays.
• Connection of up to 8 LEDs or LED strips
• Output of different light patterns via the connected LEDs or LED strips
• Control of the light patterns by channels 5 - 8
• Output of acoustic (warning) signals by a buzzer
• Connection of up to 8 LEDs or LED strips
• Output of different light patterns via the connected LEDs or LED strips
• Control of the light patterns by channels 5 - 8
• Output of acoustic (warning) signals by a buzzer
3. Servo connection
Up to 4 servos (channels 5 – 8) can be connected to the combiboard and are then directly
controlled by the main control of the “QuadroCopter 450”.
Up to 4 servos (channels 5 – 8) can be connected to the combiboard and are then directly
controlled by the main control of the “QuadroCopter 450”.