DJI Quadcopter RtF incl. GPS, incl. camera Inspire 1 with 2RC Hoja De Datos

©

 2014 DJI. All Rights Reserved. 

Appendix

INSPIRE 1

  User Manual

How to Update Firmware

Follow the steps below to upgrade your Inspire 1’s firmware, including the firmware for the remote 

controller and battery.

Updating the Aircraft Firmware

Step 1- Check Battery and SD Card Capacity

Ensure the Intelligent Flight Battery and Remote Controller have at least 50% power and there is at least 

100MB of free space on the SD card.

Step 2- Prepare the Firmware Update Package

1. Download the firmware update package from the official DJI website (http://www.dji.com/product/

inspire-1). 

2. Insert the SD into your PC. Extract the all downloaded files into the root directory of the SD card. 

Remove the SD card from your PC and insert it into the SD card slot on the Inspire 1 camera.

Step 3- Update the Aircraft

1.  Connect your mobile device to the remote controller, power on the remote controller, and launch the 

DJI Pilot app to obtain information about firmware update progress. Confirm you wish to update within 

the app to continue. Note the upgrade will begin automatically after power cycling the aircraft if the DJI 

Pilot app is not launched.

2. It will take approximately 25 minutes to complete the firmware update. During the upgrade process, 

DJI Pilot app will display update progress and gimbal will sound a fast beeping sound(D-D-D-D). A 

message windows of "Upgrade Completed, Aircraft will restart in 5 seconds" will prompt in DJI Pilot 

app and gimbal will sound a slow beeping sound (D--DD) to indicate the update is complete, aircraft 

will then restart automally. Note that user will need to manually power cycle the aircraft if DJI Pilot app 

is not launched prior to the upgrade.

3. Try update again if gimbal sounds a long beeping sound.

Updating the Remote Controller Firmware

Step 1- Check Battery

The remote controller firmware is included in the aircraft firmware update package. Use the same update 

file that is downloaded from the official DJI website. Ensure the remote controller’s remaining battery level 

is at least 50%. 

Step 2- Prepare the Firmware Update Package

1.  Extract all downloaded files into the root directory of an SD card or USB thumb drive. 

2.  With the remote controller powered off, insert the SD card into a SD card reader and plug the reader 

into the USB port on the remote. Or if using a USB thumb drive, plug it directly into the remote’s USB 

port. If you do not have a SD card reader or USB thumb drive, you may insert the SD card into the 

gimbal and connect the gimbal to the remote controller with a USB cable. 

Step 3- Update the Remote Controller

1. Power on the remote controller and wait 60 seconds until the upgrade begins. Do not power off the 

remote controller during the update.

2.  It will take approximately 10 minutes to complete the firmware update. The Inspire 1’s camera will emit 

a beeping sound and the Status LED on the remote controller will show a solid blue light to indicate