AEG PAA3P 900273504 Hoja De Datos

Chemical-resistant, impervious gloves complying with an approved

standard should be worn at all times when handling chemical

products if a risk assessment indicates this is necessary.  After

contamination with product change the gloves immediately and

dispose of them according to relevant national and local regulations

<1 hours (breakthrough time): PVC , nitrile rubber , Polychloroprene

- CR

Safety eyewear complying with an approved standard should be

used when a risk assessment indicates this is necessary to avoid

exposure to liquid splashes, mists, gases or dusts.

Recommended: safety glasses with side-shields

Personal protective equipment for the body should be selected

based on the task being performed and the risks involved and

should be approved by a specialist before handling this product.

: Wash hands, forearms and face thoroughly after handling chemical

products, before eating, smoking and using the lavatory and at the

end of the working period.  Appropriate techniques should be used

to remove potentially contaminated clothing.  Wash contaminated

clothing before reusing.  Ensure that eyewash stations and safety

showers are close to the workstation location.

Emissions from ventilation or work process equipment should be

checked to ensure they comply with the requirements of

environmental protection legislation.  In some cases, fume

scrubbers, filters or engineering modifications to the process

equipment will be necessary to reduce emissions to acceptable

levels.

Solid. [beads]

Odourless.

Yellow. opaque [Light]

: 680 to 760 kg/m

3

Insoluble in the following materials: cold water

: 1.18 kg/L (20 °C)

: Under normal conditions of storage and use, hazardous

decomposition products should not be produced.

The product is stable.

Take precautionary measures against static discharges. Contact

with strong oxidising agents may cause hazardous reactions.

: Under normal conditions of storage and use, hazardous reactions

will not occur.