GoPro HERO4 Black / Surf CHDSX-401-EU Manual De Usuario

/ Getting Started

/ Getting Started

Slim housing surfboard mount installation

Slim housing remove camera

Slim housing insert camera

Slim housing closed

Swapping housing doors

Quick Release Buckle + Thumb Screw + Slim housing = Complete Unit

4. Charge the battery by connecting the camera to a computer or 

other USB charging adapter using the included USB cable. The 
camera status light turns on during charging and turns off when 
charging is complete.

NOTICE: Using a wall charger other than a GoPro Wall Charger can 
damage the GoPro battery. Only use chargers marked: output 5V 
1A. If you do not know the voltage and current of your charger, use 
the included USB cable to charge the camera from your computer.

When charging with a computer, be sure that the computer is 
connected to a power source. If the camera status light does not 
turn on, use a different USB port.

The included lithium-ion battery comes partially charged. No damage 
occurs to the camera or battery if used prior to a full charge.

PRO TIP: With the Dual Battery Charger, you can charge your battery 
outside of the camera. For details, visit 

gopro.com.

For more battery information, see Battery. 

1. Remove the camera from its housing. 

 
 

2. Remove the camera side door and insert a microSD card (sold 

separately). The card must have a Class 10 or UHS-1 rating and 
a capacity up to 64GB. Visit 

gopro.com/support for the list of 

recommended SD cards.

3.  Open the bottom door, insert the battery and then close the  

bottom door.