Fantec BeastVision HD Wi-Fi Bike & Ski 7009 Hoja De Datos
Los códigos de productos
7009
33
13. Wi-Fi backpack installation and use
1. State of charge
Long press the power key for 3s:
1) If the blue indicator remains on for 3s and then goes out, the battery power is higher than 65%;
2) If the green indicator remains on for 3s and then goes out, the battery power is between 35% and 65%;
3) If the red indicator remains on for 3s and then goes out, the battery power is lower than 35%.
Prompt for low battery: in case of low battery, the red indicator will flash quickly; if the Wi-Fi is turned on, you will
hear an alarm for low power; the alarm will not stop until 10s after the Wi-Fi is turned off.
1) If the blue indicator remains on for 3s and then goes out, the battery power is higher than 65%;
2) If the green indicator remains on for 3s and then goes out, the battery power is between 35% and 65%;
3) If the red indicator remains on for 3s and then goes out, the battery power is lower than 35%.
Prompt for low battery: in case of low battery, the red indicator will flash quickly; if the Wi-Fi is turned on, you will
hear an alarm for low power; the alarm will not stop until 10s after the Wi-Fi is turned off.
Note: In case of low battery, the red indicator will flash quickly; if the Wi-Fi is turned
on, you will hear an alarm for low power; the alarm will not stop until 10s after the Wi-Fi is turned off.
on, you will hear an alarm for low power; the alarm will not stop until 10s after the Wi-Fi is turned off.
Note: WiFi Backpack does not support plug
and play. Please turn off your camera before
installing WiFi Backpack.
and play. Please turn off your camera before
installing WiFi Backpack.
WiFi Indicator / Blue
Indicator / Green
Charging Indicator / Red
Power Key (press it to
turn on/off the WiFi; long
press it for 3s to check
the battery level)
Indicator / Green
Charging Indicator / Red
Power Key (press it to
turn on/off the WiFi; long
press it for 3s to check
the battery level)