ConiuGo 700100107 EasyGuard II 700100107 Manual De Usuario
Los códigos de productos
700100107
46
Revision 9.0
GSM Alarm & Telemetry systems
14. GPS Function (only Advanced GSM Modul)
In use with a GPS Mouse connected to the serial port of the GSM module the device
is able to send its actual position data to a defined target number. This data can be
entered into a special GPS Software (e.g. GID Route Premium) in order to indicate
by a grafic overlay the position of the supervised object. Therefore the GPS Mouse
has to be connected to the serial port of the module after the configuration was done
successfully.
To send the GPS data you have to change the content (not the name of the SMS!!!)
of the predefined SMS (“Outgoing SMS”) to GPSDATA or GPS. Each name will
trigger another kind of position indication which will be sent out:
GPSDATA:
Data will be sent in a plain text string.
<module indentification><blank>
GPRMC,<1>, <2>,<3>,<4>,<5>,<6>,<7>,<8>,<9>,<10>,<11>,<12>
The single parameters in the report (like <1>) have the following meanings (bold
marked reports are necessary for the location in a GPS software):
1. UTC Time hhmmss
2. Status, A=Valid Position, V=NAV receiver warning
3. Latitude, ddmm.mmmm (with leading zeros sended)
4. N or S hemishere
5. Longitude dddmm.mmmm Format (with leading zeros sended)
6. Longitude E or W
7. Speed 0000.0 Knot (with leading zeros sended)
8. Course 000.0 up to 359.9 degree
9. UTC date ddmmyy
10. Magnetic Variations 000.0 to 180.0 degrees
11. Magnetic variation direction E or W
12. Mode Indicator
GPS:
Data will send as a string.