Cypress Semiconductor CapSense® Controller kit CY3280-BK1 CY3280-BK1 CY3280-BK1 Manual De Usuario
Los códigos de productos
CY3280-BK1
CY3280-BK1 Universal CapSense Controller Quick Start, Doc. # 001-37959 Rev. **
21
Create a PSoC Designer CapSense Project
Configure CSA, LED, and I2C User Modules in Your Design
5.22 Select the CSA User Module.
5.23 Set the External Cap to P0[3], under User Module Parameters (on the left center).
5.24 Select the LED user module.
5.25 Set the port to Port_1 and the pin to Port_1_2.
5.26 Set the drive to active low.
5.27 Select the EzI2Cs user module.
5.28 Set the I2C Clock to 400K Fast.
5.29 Set the I2C Pin to P1[0]-P1[1].
Configure Sensor Pins Using the CSA Wizard
5.30 Right-click the CSA user module.
5.31 Select CSA Wizard.
5.32 Drag P2[3] to SW0.
5.33 Click OK. The Wizard will close.
5.34 Select Config
Generate Application.