Texas Instruments 3.125 Gbps LVDS Buffer Repeater Evaluation Kit DS25BR150EVK/NOPB DS25BR150EVK/NOPB Hoja De Datos
Los códigos de productos
DS25BR150EVK/NOPB
DS25BR150EVK User Manual
DS25BR150 Evaluation
This section provides recommended test setup procedure for the device evaluation. Figure 2 depicts a
typical setup and instrumentation you may use for the device evaluation.
typical setup and instrumentation you may use for the device evaluation.
1. Apply the power to the device (3.3V typical) between VDD and GND connectors.
2. Connect a signal source (i.e. signal generator or an LVDS driver) to the input (R2 label) on the
board and adjust the signal parameters (VOH, VOL, VCM) so that they comply with the device
input recommendations.
input recommendations.
3. Connect the output (U2 label) to an oscilloscope and view the output signals with an oscilloscope
that has the bandwidth of at least 5 GHz.
Figure 2. DS25BR150 Test Setup Example
Page 4 of 5