Microchip Technology XC8 Standard Compiler (Workstation) SW006021-1 SW006021-1 Manual De Usuario
Los códigos de productos
SW006021-1
MPLAB
®
XC8 C Compiler User’s Guide
DS52053B-page 442
2012 Microchip Technology Inc.
(822) duplicate ROMSIZE for "*" in chipinfo file at line *
(Assembler)
The chipinfo file has a device section with multiple ROMSIZE values. Only one
ROMSIZE value is allowed. If you have not manually edited the chip info file, contact
Microchip Technical Support with details.
ROMSIZE value is allowed. If you have not manually edited the chip info file, contact
Microchip Technical Support with details.
(823) duplicate START for "*" in chipinfo file at line *
(Assembler)
The chipinfo file has a device section with multiple START values. Only one START
value is allowed. If you have not manually edited the chip info file, contact Microchip
Technical Support with details.
value is allowed. If you have not manually edited the chip info file, contact Microchip
Technical Support with details.
(824) duplicate LIB for "*" in chipinfo file at line *
(Assembler)
The chipinfo file has a device section with multiple LIB values. Only one LIB value is
allowed. If you have not manually edited the chip info file, contact Microchip Technical
Support with details.
allowed. If you have not manually edited the chip info file, contact Microchip Technical
Support with details.
(825) too many RAMBANK lines in chipinfo file for "*"
(Assembler)
The chipinfo file contains a device section with too many RAMBANK fields. Reduce the
number of values.
number of values.
(826) inverted ram bank in chipinfo file at line *
(Assembler, Driver)
The second HEX number specified in the RAM field in the chipinfo file must be greater
in value than the first.
in value than the first.
(827) too many COMMON lines in chipinfo file for "*"
(Assembler)
There are too many lines specifying common (access bank) memory in the chip
configuration file.
configuration file.
(828) inverted common bank in chipinfo file at line *
(Assembler, Driver)
The second HEX number specified in the COMMON field in the chipinfo file must be
greater in value than the first. Contact Microchip Technical Support if you have not
modified the chipinfo INI file.
greater in value than the first. Contact Microchip Technical Support if you have not
modified the chipinfo INI file.
(829) unrecognized line in chipinfo file at line *
(Assembler)
The chipinfo file contains a device section with an unrecognized line. Contact Microchip
Technical Support if the INI has not been edited.
Technical Support if the INI has not been edited.
(830) missing ARCH specification for "*" in chipinfo file
(Assembler)
The chipinfo file has a device section without an ARCH values. The architecture of the
device must be specified. Contact Microchip Technical Support if the chipinfo file has
not been modified.
device must be specified. Contact Microchip Technical Support if the chipinfo file has
not been modified.
(832) empty chip info file "*"
(Assembler)
The chipinfo file contains no data. If you have not manually edited the chip info file, con-
tact Microchip Technical Support with details.
tact Microchip Technical Support with details.
(833) no valid entries in chipinfo file
(Assembler)
The chipinfo file contains no valid device descriptions.
(834) page width must be >= 60
(Assembler)
The listing page width must be at least 60 characters. Any less will not allow a properly
formatted listing to be produced, for example:
formatted listing to be produced, for example:
LIST C=10 ; the page width will need to be wider than this