Texas Instruments TLV320AIC3106 Evaluation Module (EVM) and USB motherboard TLV320AIC3106EVM-K TLV320AIC3106EVM-K Hoja De Datos
Los códigos de productos
TLV320AIC3106EVM-K
www.ti.com
TLV320AIC3106EVM Software
4.8
GPIO Tab
Figure 10. GPIO Tab
The GPIO tab (see
) selects options for the general-purpose inputs and outputs (GPIO) of the
TLV320AIC3106. Many pins on the TLV320AIC3106 are denoted as multifunction pins, meaning they may
be used for many different purposes.
be used for many different purposes.
The GPIO1 groupbox contains controls for setting options for the GPIO1 pin. The Function control selects
the function of GPIO1 from the following:
•
the function of GPIO1 from the following:
•
ADC Word Clock
•
An output clock derived from the reference clock (see
data sheet)
•
Interrupt output pin to signal:
–
Short Circuit
–
AGC Noise Threshold detection
–
Jack/Headset detection
•
For use as an interrupt output, the behavior of the interrupt can be selected using the Interrupt
Duration control. A Single, 2ms pulse can be delivered when the selected interrupt occurs, or
Continuous Pulses can be generated signaling the interrupt.
Duration control. A Single, 2ms pulse can be delivered when the selected interrupt occurs, or
Continuous Pulses can be generated signaling the interrupt.
•
Alternate I
2
S Word Clock
•
A digital microphone output–modulator clock for use with a digital microphone (see
and the
data sheet).
•
A general-purpose I/O pin
–
If selected as a General Purpose Input, the state of the GPIO1 pin is reflected by the Input Level
indicator. If selected as a General Purpose Output, the state of the GPIO1 pin can be set by using
the Output Level button.
indicator. If selected as a General Purpose Output, the state of the GPIO1 pin can be set by using
the Output Level button.
17
SLAU209A – April 2007 – Revised June 2010
TLV320AIC3106EVM and TLV320AIC3106EVM-PDK
Copyright © 2007–2010, Texas Instruments Incorporated