Texas Instruments TLV71733PEVM-072 Evaluation Module TLV71733PEVM-072 TLV71733PEVM-072 Hoja De Datos
Los códigos de productos
TLV71733PEVM-072
Test Results
4
Test Results
This section provides typical performance waveforms for the TLV71733PEVM-072 printed-circuit board
(PCB).
(PCB).
4.1
Turnon Sequence
shows the turnon/off characteristic where VIN is preset to 5 V, the output drives a 100-mA load,
and the EN turnon is stepped to 5 V (C2, red). The output (C3, blue) shows a monotonic rise time of
approximately 50
approximately 50
µ
s. The output voltage start-up ramp is not load dependant.
Figure 1. Turnon Sequence
4.2
Output Load Transient
shows the load transient response (VOUT - C3, blue) for a full-load step transient from 20 mA to
150 mA (C4, green). VIN is set at 5 V.
3
SLVU553
–
October 2011
TLV71733PEVM-072 Evaluation Module
Copyright
©
2011, Texas Instruments Incorporated