Texas Instruments MSP-TS430PW28 - MSP430 28-Pin Socket Target Board MSP-TS430DW28 MSP-TS430DW28 Hoja De Datos
Los códigos de productos
MSP-TS430DW28
MSP-TS430PN80USB
B.23 MSP-TS430PN80USB
Due to the use of diodes in the power chain, the voltage on the MSP430F5xx device is approximately
0.3 V lower than is set by the debugging tool. Set the voltage in the IDE to 0.3 V higher than desired; for
example, to run the MCU at 3.0 V, set it to 3.3 V.
0.3 V lower than is set by the debugging tool. Set the voltage in the IDE to 0.3 V higher than desired; for
example, to run the MCU at 3.0 V, set it to 3.3 V.
NOTE: R11 should be populated.
Figure B-45. MSP-TS430PN80USB Target Socket Module, Schematic
99
SLAU278Q – May 2009 – Revised February 2014
Hardware
Copyright © 2009–2014, Texas Instruments Incorporated