Texas Instruments DRV8806 Evaluation Module DRV8806EVM DRV8806EVM Hoja De Datos
Los códigos de productos
DRV8806EVM
J6
J12
PCB
1.2
Connectors
1.2.1
Power Connectors
The DRV88xx Customer EVM offers access to VM (Motor Voltage) power rail via a terminal block (J6) and
header pins (J7). A set of test clips at the top of the board in parallel with the terminal block allows for the
monitoring of the input power rail. The polarity of the terminal connections are mentioned in the silkscreen.
User must power the EVM using the correct polarity. User must apply VM according to datasheet
recommended parameters.
header pins (J7). A set of test clips at the top of the board in parallel with the terminal block allows for the
monitoring of the input power rail. The polarity of the terminal connections are mentioned in the silkscreen.
User must power the EVM using the correct polarity. User must apply VM according to datasheet
recommended parameters.
Figure 3. Power Connectors
6
SLVU574A – September 2011 – Revised June 2012
Copyright © 2011–2012, Texas Instruments Incorporated