Texas Instruments DS90UB914A-CXEVM: FPD-Link III Deserializer Evaluation Module DS90UB914A-CXEVM DS90UB914A-CXEVM Hoja De Datos
Los códigos de productos
DS90UB914A-CXEVM
Optional use of header provided for external Imager and Host
On DES board,
•
Mount L5 (2.7uH), L6 (2.7uH)
•
Put jumpers on JP3 and JP4 to match the polarity of supply (check on pin2 of each header)
Figure 4-2. Power over STP: SER configuration
Figure 4-3. Power over STP: DES configuration
4.4
Optional use of header provided for external Imager and Host
This hardware configuration allows connecting an external imager (OV10630) to DS90UB913AQ Serializer
and an external host (PIXCI ECB1-34 Base camera link express card/frame grabber) to DS90UB914AQ
Deserializer board. To operate in this configuration, following hardware changes are required:
and an external host (PIXCI ECB1-34 Base camera link express card/frame grabber) to DS90UB914AQ
Deserializer board. To operate in this configuration, following hardware changes are required:
1. On Serializer board, populate JP10, R67, R68, R69, R70, R72, R73, R75, R76, R77, R78, R79, R81,
19
SNLU135 – JUNE 2013
Additional Features
Copyright © 2013, Texas Instruments Incorporated