Microchip Technology MCP4725EV Manual De Usuario

MCP4725 SOT-23-6 EVALUATION

BOARD USER’S GUIDE

DS51669A-page 1

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the
MCP4725 SOT-23-6 Evaluation Board. Items discussed in this chapter include:

• Document Layout

• Conventions Used in this Guide

• Recommended Reading

• The Microchip Web Site

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the MCP4725 SOT-23-6 Evaluation Board as a
development tool to emulate and debug firmware on a target board. The manual layout
is as follows:

• Chapter 1. “Quick Start Instructions” – this chapter provides an overview of the

MCP4725 SOT-23-6 Evaluation Board and instructions on how to program the
DAC register and EEPROM of the MCP4725 device.

• Appendix A. “Schematics and Board Layouts” – shows the schematic and lay-

out diagrams for the MCP4725 SOT-23-6 Evaluation Board.

• Appendix B. “Bill Of Materials (BOM)” – lists the parts used to build the

MCP4725 SOT-23-6 Evaluation Board.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.

For the most up-to-date information on development tools, see the MPLAB

IDE on-line help.

Select the Help menu, and then Topics to open a list of available on-line help files.