Microchip Technology Microstick for the 5V PIC24F K-series DM240013-2 DM240013-2 Hoja De Datos

 2013 Microchip Technology Inc.

DS30003030B-page 1

• Up to Two 8-Bit Digital-to-Analog Converters 

(DACs):
- Soft Reset disable function allows DAC to 

retain its output value through non-V

DD

 

Resets

- Support for Idle mode
- Support for left and right justified input data

• Two Operational Amplifiers (Op Amps):

- Differential inputs
- Selectable power/speed levels:

- Low power/low speed
- High power/high speed

• Up to 22-Channel, 10/12-Bit Analog-to-Digital 

Converter:
- 100k samples/second at 12-bit conversion 

rate (single Sample-and-Hold)

- Auto-scan with Threshold Detect
- Can operate during Sleep
- Dedicated band gap reference and 

temperature sensor input

• Up to Three Rail-to-Rail Analog Comparators:

- Programmable reference voltage for 

comparators

- Band gap reference input
- Flexible input multiplexing
- Low-power or high-speed selection options

• Charge Time Measurement Unit (CTMU):

- Capacitive measurement, up to 22 channels
- Time measurement down to 200 ps 

resolution

- Up to 16 external Trigger pairs

• Internal Temperature Sensor with Dedicated A/D 

Converter Input

• Modified Harvard Architecture
• Operating Speed:

- DC – 32 MHz clock input
- 16 MIPS at 32 MHz clock input

• 8 MHz Internal Oscillator:

- 4x PLL option
- Multiple clock divide options
- Fast start-up

• 17-Bit x 17-Bit Single-Cycle Hardware 

Fractional/Integer Multiplier

• 32-Bit by 16-Bit Hardware Divider
• 16 x 16-Bit Working Register Array
• C Compiler Optimized Instruction Set Architecture
• 24-Bit-Wide Instructions
• 16-Bit-Wide Data Path
• Linear Program Memory Addressing, up to 

6 Mbytes

• Linear Data Memory Addressing, up to 64 Kbytes 
• Two Address Generation Units (AGUs) for Separate 

Read and Write Addressing of Data Memory

• 16 or 32-Bit Time Base
• 16 or 32-Bit Capture:

- 4-deep capture buffer

• 16 or 32-Bit Compare:

- Single Edge Compare modes
- Dual Edge Compare/PWM modes
- Center-Aligned Compare mode
- Variable Frequency Pulse mode

• Single Output Steerable mode (MCCP only)
• Brush DC Forward and Reverse modes 

(MCCP only)

• Half-Bridge with Dead-Time Delay (MCCP only)
• Push-Pull PWM mode (MCCP only)
• Auto-Shutdown with Programmable Source and 

Shutdown State

• Programmable Output Polarity