Microchip Technology DM240312 Hoja De Datos
PIC24FJ256DA210
DEVELOPMENT BOARD
USER’S GUIDE
2010 Microchip Technology Inc.
DS51911A-page 31
Chapter 4. Development Board Hardware
4.1
INTRODUCTION
This chapter provides a more detailed description of the hardware on the
PIC24FJ256DA210 Development Board, and the procedures on configuring its many
features. Topics covered include:
PIC24FJ256DA210 Development Board, and the procedures on configuring its many
features. Topics covered include:
• Functional Overview
• General Hardware Features
• Setup and Configuration
4.2
FUNCTIONAL OVERVIEW
The development board is centered on the PIC24FJ256DA210 microcontroller which
integrates in a single package a graphic controller, a CTMU for touch-sensing applica-
tions, and a wide range of other peripherals.
integrates in a single package a graphic controller, a CTMU for touch-sensing applica-
tions, and a wide range of other peripherals.
The microcontroller’s Graphics module is capable of driving TFT, CSTN and MSTN dis-
plays in a number of sizes and color depths. Many display applications (up to 8 bpp in
QVGA) can be run from the microcontroller’s 96 KByte RAM buffer. For bigger displays
or higher color resolution, the microcontroller can directly interface with external RAM
devices for additional data storage. For non-volatile data storage, both serial and
parallel Flash memory devices are provided.
plays in a number of sizes and color depths. Many display applications (up to 8 bpp in
QVGA) can be run from the microcontroller’s 96 KByte RAM buffer. For bigger displays
or higher color resolution, the microcontroller can directly interface with external RAM
devices for additional data storage. For non-volatile data storage, both serial and
parallel Flash memory devices are provided.
The built-in USB functionality can be configured to operate in Device mode, as a
stand-alone USB host, or as a USB On-The-Go (OTG) device. Host and OTG modes
can be additionally configured for different types of bus sensing and external regulator
support.
stand-alone USB host, or as a USB On-The-Go (OTG) device. Host and OTG modes
can be additionally configured for different types of bus sensing and external regulator
support.
Push buttons, CTMU touch sensors and a potentiometer are provided for a variety of
user-defined inputs. These share three common I/Os on the microcontroller, along with
three LEDs, and are configured manually with jumpers.
user-defined inputs. These share three common I/Os on the microcontroller, along with
three LEDs, and are configured manually with jumpers.
A PICtail Plus edge connector is provided, allowing the development board to be used
with different compatible PICtail Plus daughter board. An RS-232 port is provided for
general purpose serial communications between the development board and a host
PC; this serial port can also be re-configured to be available through the PICtail Plus
connector.
with different compatible PICtail Plus daughter board. An RS-232 port is provided for
general purpose serial communications between the development board and a host
PC; this serial port can also be re-configured to be available through the PICtail Plus
connector.
Figure 4-1 shows the main components of the development board.