Microchip Technology AC244045 Hoja De Datos
Required Debug Headers
2006-2012 Microchip Technology Inc.
DS51292U-page 23
AC162066
Header Identification
The header AC number is used for ordering the header. However, this number is not
on the debug header, as the board is often used for multiple headers by inserting
different ICE/ICD devices. To identify this debug header, use the following information.
on the debug header, as the board is often used for multiple headers by inserting
different ICE/ICD devices. To identify this debug header, use the following information.
Header Setup and Operation
For the PIC16F639 20-pin header, you will need to connect the jumper J3 as specified
below.
below.
In addition to being used with debug tools that normally use headers, this header is
used with the PCM16YM0 processor module to emulate a PIC16F639 on the MPLAB
ICE 2000 in-circuit emulator. Plug the end of the processor module into the header, and
then plug the header into the transition socket or directly onto the target board.
used with the PCM16YM0 processor module to emulate a PIC16F639 on the MPLAB
ICE 2000 in-circuit emulator. Plug the end of the processor module into the header, and
then plug the header into the transition socket or directly onto the target board.
Header Limitations
See the “Limitations” section in your debug tool online Help file for details.
Header
ICE/ICD Device
Board Assembly Number
AC162066
PIC16F636-ICD
02-01832
Tool
Jumper J3
Function
MPLAB
®
ICE 2000
1-2
Run/program as production device
In-circuit debuggers,
next generation in-circuit emulators
next generation in-circuit emulators
2-3
Run/program as ICD device