Gw Instek LCR-821 Digital-Multimeter, DMM, LCR-821 Hoja De Datos
Los códigos de productos
LCR-821
RS232
REMOTE
83
4. Press OK to exit.
Note
All file menus (File, Option, Data, Help) are restricted
in Auto mode. To change to manual mode see page 80
to change to Manual mode remotely.
in Auto mode. To change to manual mode see page 80
to change to Manual mode remotely.
Exit LCR Viewer
Operation
1. Press the POWER software button
or go to FileExit when in manual
mode.
mode.
Note
All file menus (File, Option, Data, Help) are restricted
in Auto mode. To change to manual mode see page 80
to change to Manual mode remotely.
in Auto mode. To change to manual mode see page 80
to change to Manual mode remotely.
LCR-800
User
Manual
84
Terminal Connection
Configure Terminal Connection
Background
To connect the LCR-800 to a terminal program,
follow the instructions below.
follow the instructions below.
Connection
Settings
Settings
1. Connect the LCR meter to the PC
with an RS232 cable.
2. Ensure the LCR-800 is set to
manual (single) measurement
mode.
mode.
Page 43
3. Ensure RS232 has been enabled on
the LCR meter.
Page 73
4. Open a terminal program such as
MTTTY (Multithreaded TTY).
5. Check the COM port settings on the
PC. In Windows use Device
Manager. Go to the Control
PanelSystemHardware tab to
see the COM port settings.
Manager. Go to the Control
PanelSystemHardware tab to
see the COM port settings.