Gw Instek GDM-8342USB Digital-Multimeter, DMM, GDM-8342USB Hoja De Datos
Los códigos de productos
GDM-8342USB
USB STORE
97
5. The USB stick can now be removed or another
save operation can be performed.
WARNING
Do not remove the USB stick while the DMM is
saving to the USB drive.
saving to the USB drive.
Note
The USB STO icon will flash at a faster rate (~5
times/second) if there is no more space left on the
USB stick or if the automatically-incremented
filename suffix, XX, has reached its maximum
value, 99, and cannot be increased further.
times/second) if there is no more space left on the
USB stick or if the automatically-incremented
filename suffix, XX, has reached its maximum
value, 99, and cannot be increased further.
Display
V
S
DC
Recorded
Measurement
USB STO
icon
USBSTO
Save to USB (Advance Mode)
Overview
The procedure below describes the save
operation when the Mode is set to Advance.
operation when the Mode is set to Advance.
Procedure
1. Insert a USB stick into the USB Host port on the
front panel.
2. If the USB stick is recognized by the DMM, the
USB STO icon will be lit. This indicates that the
DMM is ready to save files to the USB stick.
DMM is ready to save files to the USB stick.
3. Press SHIFT → MENU.
4. Each Advance mode setting will now appear
one after the other. Set each option and press
the Enter key to continue to the next option.
the Enter key to continue to the next option.
The following options will appear in order: