Freescale Semiconductor Daughter Card for DEMOEM DCF51EM256 DCF51EM256 Manual De Usuario
Los códigos de productos
DCF51EM256
30
DEMOEM User Manual
processor which they wish to view on the PC.
Figure 7-16: Jumper Settings for Input Signals to P&E’s Embedded Multilink, P&E
INPUT_EN (J18)
7.10
LCD Module
The DEMOEM brings all LCD signals to two 22x2 headers, J26 and J27. By
default all jumpers are installed.
default all jumpers are installed.
Header 25 is used to demonstrate FP/BP selection.
Figure 7-17: LCD Module Header (J25)
By default, LCD0 controls BP0 and LCD4 controls FP0.
7.11
P&E Light Touch Switch Enable Header
7.11.1
J28 - Light Touch Switch Enable KEY_EN
Figure 7-18: Jumper Settings for Light Touch Switch Enable KEY_EN (J28)
Enables the corresponding switch. Each jumper may be individually
installed or removed. By default, all jumpers are installed to enable all
the switches.
installed or removed. By default, all jumpers are installed to enable all
the switches.
7.12
Differential Analog Channel Inputs
The DEMOEM board brings DADM0, DADM1, and DADM2 signals to header