Freescale Semiconductor Daughter Card for DEMOEM DCF51EM256 DCF51EM256 Manual De Usuario
Los códigos de productos
DCF51EM256
DEMOEM User Manual
37
•
Supported by P&E software and Freescale’s CodeWarrior
9.2
Working With P&E’s USB Multilink
Figure 9-1: P&E’s USB Multilink (USB-ML-12 shown)
9.2.1
Product Features & Implementation
P&E’s USB Multilink Interface (USB-ML-12) connects your target to your PC
and allows the PC access to the Background Debug Mode (BDM) on
Freescale’s ColdFireV1, HCS08, RS08, and HC(S)12(X) microcontrollers. It
connects between a USB port on a Windows 2000/XP/2003/Vista machine
and a standard 6-pin debug connector on the target.
and allows the PC access to the Background Debug Mode (BDM) on
Freescale’s ColdFireV1, HCS08, RS08, and HC(S)12(X) microcontrollers. It
connects between a USB port on a Windows 2000/XP/2003/Vista machine
and a standard 6-pin debug connector on the target.
By using the USB Multilink Interface, the user can take advantage of the
background debug mode to halt normal processor execution and use a PC to
control the processor. The user can then directly control the target’s
execution, read/write registers and memory values, debug code on the
processor, and program internal or external FLASH memory devices.The
USB Multilink enables you to debug, program, and test your code on your
board.
background debug mode to halt normal processor execution and use a PC to
control the processor. The user can then directly control the target’s
execution, read/write registers and memory values, debug code on the
processor, and program internal or external FLASH memory devices.The
USB Multilink enables you to debug, program, and test your code on your
board.
9.2.2
Software
The USB Multilink Interface works with Codewarrior as well as P&E’s in-circuit
debugger and flash programmer to allow debug and flash programming of the
target processor. P&E’s USB Multilink Development Packages come with the
USB Multilink Interface, as well as flash programming software, in-circuit
debugging software, Windows IDE, and register file editor.
debugger and flash programmer to allow debug and flash programming of the
target processor. P&E’s USB Multilink Development Packages come with the
USB Multilink Interface, as well as flash programming software, in-circuit
debugging software, Windows IDE, and register file editor.