Freescale Semiconductor Demonstration Board for Freescale MC9S12XHY256 Microcontroller DEMO9S12XHY256 DEMO9S12XHY256 Manual De Usuario

Freescale Semiconductor

719

This pin is used for production testing only. The TEST pin must be tied to V

SS

 in all applications.

Power supply must maintain regulation within operating V

DD35

 or V

DD

 range during instantaneous and

operating maximum current conditions. If positive injection current (V

in

 > V

DD35

) is greater than I

DD35

,

the injection current may flow out of V

DD35

 and could result in external power supply going out of

regulation. Ensure external V

DD35

 load will shunt current greater than maximum injection current. This

will be the greatest risk when the MCU is not consuming power; e.g., if no system clock is present, or if
clock rate is very low which would reduce overall power consumption.

Absolute maximum ratings are stress ratings only. A functional operation under or outside those maxima
is not guaranteed. Stress beyond those limits may affect the reliability or cause permanent damage of the
device.

This device contains circuitry protecting against damage due to high static voltage or electrical fields;
however, it is advised that normal precautions be taken to avoid application of any voltages higher than
maximum-rated voltages to this high-impedance circuit. Reliability of operation is enhanced if unused
inputs are tied to an appropriate logic voltage level (e.g., either V

SS35

 or V

DD35

).