Conrad Course material 10127 14 years and over 10127 Manual De Usuario

Use the red and black experimenting cables at the ends of which alligator terminals 

are connected to quickly and simply electrically connect parts to the circuit and to 

each other – without soldering gun and screwdriver. It is sensible to use the red 

connection cables for the plus pole and the black ones for the minus pole.
 

Fig. 012: Experimenting cable with alligator clamps

Wire bridges can be made of the enclosed jumper wire. For this, estimate or 

measure the approximate length of the wire jumper (plus the length for the wire 

ends that are to be pushed into the plug-in contacts). The ends must be stripped 

on approx. 8 mm then. Connection wires that were cut off with a wire cutter can be 

plugged more easily. The wire jumpers produced once can be reused as often as 

desired.