Conrad Course material 10127 14 years and over 10127 Manual De Usuario
Los códigos de productos
10127
20
3.1 Energy Storage with the Electrolytic Capacitor
Test setup: Plug board, cable with USB-A plugs and pins, resistor 1 kΩ, red LED,
electrolytic capacitor, 1,000 µF
The preceding setup is expanded by the electrolytic capacitor. The connection
The preceding setup is expanded by the electrolytic capacitor. The connection
wires of the electrolytic capacitor point to the plus pole rail of the plug board with
their plus poles. If the electrolytic capacitor is plugged in correctly, plug the USB
plug into the USB plug-in mains adapter. The LED lights up. Disconnect the USB
plug from the USB source. The red LED will continue to be lit for a short time
although the power supply has been interrupted. The power is interim-stored in the
electrolytic capacitor.
Fig. 016: Plug board with storage electrolytic capacitor
Fig. 017: Circuit diagram