Conrad Course material 10127 14 years and over 10127 Manual De Usuario

The experimenting board, also called a lab plug board or simply plug board, 

permits setting up the experiments without using a soldering gun. It comprises 

of contact springs inside that are connected to each other in a row system. The 

electronic components and connection wires can be plugged into the contacts 

repeatedly and thus permit circuit setup without soldering or screwing. Connection 

wires diagonally cut off with a wire cutter can be pushed in most easily. 
The plug board enclosed with the learning package has a total of 270 contacts in 

the 2.54-mm grid. The 230 contacts in the middle area are connected by vertical 

strips in rows of 5 each. 
At the edges of the wide side, there is one row each with 20 contact points that are 

horizontally connected with a rail. These „upper“ and „lower“ rows are well suitable 

as power supply rails. 

Fig. 001: The plug board – the power supply rails at the top and bottom