Freescale Semiconductor Tower System Eval Kit for MC9S12GN32 TWR-S12GN32-KIT TWR-S12GN32-KIT Hoja De Datos
Los códigos de productos
TWR-S12GN32-KIT
S12 Clock, Reset and Power Management Unit (S12CPMU)
MC9S12G Family Reference Manual, Rev.1.23
Freescale Semiconductor
405
10.4
Functional Description
10.4.1
Phase Locked Loop with Internal Filter (PLL)
The PLL is used to generate a high speed PLLCLK based on a low frequency REFCLK.
The REFCLK is by default the IRCCLK which is trimmed to f
IRC1M_TRIM
=1MHz.
If using the oscillator (OSCE=1) REFCLK will be based on OSCCLK. For increased flexibility, OSCCLK
can be divided in a range of 1 to 16 to generate the reference frequency REFCLK using the REFDIV[3:0]
bits. Based on the SYNDIV[5:0] bits the PLL generates the VCOCLK by multiplying the reference clock
by a 2, 4, 6,... 126, 128. Based on the POSTDIV[4:0] bits the VCOCLK can be divided in a range of 1,2,
3, 4, 5, 6,... to 32 to generate the PLLCLK.
can be divided in a range of 1 to 16 to generate the reference frequency REFCLK using the REFDIV[3:0]
bits. Based on the SYNDIV[5:0] bits the PLL generates the VCOCLK by multiplying the reference clock
by a 2, 4, 6,... 126, 128. Based on the POSTDIV[4:0] bits the VCOCLK can be divided in a range of 1,2,
3, 4, 5, 6,... to 32 to generate the PLLCLK.
.
NOTE
Although it is possible to set the dividers to command a very high clock
frequency, do not exceed the specified bus frequency limit for the MCU.
frequency, do not exceed the specified bus frequency limit for the MCU.
fVCO 2 fREF
×
SYNDIV 1
+
(
)
×
=
fREF
fOSC
REFDIV 1
+
(
)
------------------------------------
=
If oscillator is enabled (OSCE=1)
If oscillator is disabled (OSCE=0)
fREF fIRC1M
=
fPLL
fVCO
POSTDIV 1
+
(
)
-----------------------------------------
=
If PLL is locked (LOCK=1)
If PLL is not locked (LOCK=0)
fPLL
fVCO
4
---------------
=
fbus
fPLL
2
-------------
=
If PLL is selected (PLLSEL=1)