Testo 882 , 33 Hz thermography camera, -20 to +350 °C, 320 x 240 pix bolometer matrix 0560 0882 Manual De Usuario
Los códigos de productos
0560 0882
6 Using the product
36
> Continue recording: Press
[
]
again.
• Play
recording:
1.
Select beginning of recording: Press
[
]
again.
2.
Start playback: Press
[
]
.
3.
Stop playback: Press
[
]
.
> Continue playback: Press
[
]
again.
• Change
audio
comment:
1.
Selection position from which the recording should be
overwritten: Begin playback with
[
]
and stop at the
desired point
[
]
.
2.
Use
[
]
to overwrite the recording as of the desired point.
• Delete recording:
> Press
[
]
.
- The complete recording is deleted.
• Exit Audio dialogue:
>
Press
[ESC]
.
Aiming at the measuring surface
Using the laser, the measuring surface can be aimed at.
Using the laser, the measuring surface can be aimed at.
WARNING
Eye damage due to laser beam!
> Do not look into the laser beam.
> Do not point the laser beam at people.
> Do not look into the laser beam.
> Do not point the laser beam at people.
To change the quick select button functions, Changing assignment
of the quick select buttons page 21.
> Press and hold
of the quick select buttons page 21.
> Press and hold
[Laser]
.
- When the laser is active, the laser symbol (
) flashes.
Caution: Laser and lens have a different angle of view due
to the spacial separation. The laser sighting and the centre
of the image thus do not correspond completely (parallax
error). The laser dot is therefore not suitable for marking
locations that were aimed at using the crosshairs.
to the spacial separation. The laser sighting and the centre
of the image thus do not correspond completely (parallax
error). The laser dot is therefore not suitable for marking
locations that were aimed at using the crosshairs.