Meilhaus Electronic Mile House El.MML USB MEAS/switch RedLab® 1008 Hoja De Datos

InstaCal is a complete installation, calibration, and test program for MCC data 
acquisition and control hardware. Complete with extensive error checking, InstaCal 
guides you through the installation and setup of your miniLAB 1008, and creates the 
hardware configuration file for use by your programming or application software. 
InstaCal provides the easiest way to calibrate and configure the miniLAB 1008. 

 

TracerDAQ is installed with InstaCal. TracerDAQ includes fully-
configured and ready-to-run virtual instruments, such as a strip chart 
and oscilloscope. You can use these instruments to plot data from 
the miniLAB 1008 directly to your computer. Your measurements 

are plotted as they are acquired. Once acquired, you can save the measurement data to a 
text or Excel file, and capture the graphical display as a bitmap. TracerDAQ online help 
includes a quick start exercise that explains how to acquire and display data. You can 
launch TracerDAQ from InstaCal’s 

 menu.  

In the example below, the TracerDAQ virtual strip chart displays data acquired from two 
channels on the miniLAB 1008. 

 

1-3