Linksys RangePlus Wireless Router WRT110-DE Manual De Usuario
Los códigos de productos
WRT110-DE
Chapter3
Advanced Configuration
8
RangePlus Wreless Router
Static IP
If you are required to use a permanent IP address to
connect to the Internet, select Statc IP.
connect to the Internet, select Statc IP.
Internet Connection Type > Static IP
Internet IP Address
This is the Router’s IP address, when
seen from the Internet. Your ISP will provide you with the
IP address you need to specify here.
IP address you need to specify here.
Subnet Mask
This is the Router’s Subnet Mask, as seen
by users on the Internet (including your ISP). Your ISP will
provide you with the Subnet Mask.
provide you with the Subnet Mask.
Default Gateway
Your ISP will provide you with the IP
address of the ISP server.
DNS 1-3
Your ISP will provide you with at least one DNS
(Domain Name System) server IP address.
PPPoE
Some DSL-based ISPs use PPPoE (Point-to-Point Protocol
over Ethernet) to establish Internet connections. If you are
connected to the Internet through a DSL line, check with
your ISP to see if they use PPPoE. If they do, you will have
to enable PPPoE.
over Ethernet) to establish Internet connections. If you are
connected to the Internet through a DSL line, check with
your ISP to see if they use PPPoE. If they do, you will have
to enable PPPoE.
Internet Connection Type > PPPoE
Username and Password
Enter the Username and
Password provided by your ISP.
Servce Name
If provided by your ISP, enter the Service
Name.
Connect on Demand: Max Idle Tme
You can configure
the Router to cut the Internet connection after it has been
inactive for a specified period of time (Max Idle Time). If
your Internet connection has been terminated due to
inactivity, Connect on Demand enables the Router to
automatically re-establish your connection as soon as you
attempt to access the Internet again. To use this option,
select Connect on Demand. In the Max Idle Time field,
enter the number of minutes you want to have elapsed
inactive for a specified period of time (Max Idle Time). If
your Internet connection has been terminated due to
inactivity, Connect on Demand enables the Router to
automatically re-establish your connection as soon as you
attempt to access the Internet again. To use this option,
select Connect on Demand. In the Max Idle Time field,
enter the number of minutes you want to have elapsed
before your Internet connection terminates. The default
Max Idle Time is 1 minutes.
Max Idle Time is 1 minutes.
Keep Alve: Redal Perod
If you select this option,
the Router will periodically check your Internet
connection. If you are disconnected, then the Router
will automatically re-establish your connection. To use
this option, select Keep Alve. In the Redial Period field,
you specify how often you want the Router to check
the Internet connection. The default Redial Period is
30 seconds.
connection. If you are disconnected, then the Router
will automatically re-establish your connection. To use
this option, select Keep Alve. In the Redial Period field,
you specify how often you want the Router to check
the Internet connection. The default Redial Period is
30 seconds.
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a service that
applies to connections in Europe only.
applies to connections in Europe only.
Internet Connection Type > PPTP
If your ISP supports DHCP or you are connecting through
a dynamic IP address, then select Obtan an IP Address
Automatcally. If you are required to use a permanent IP
address to connect to the Internet, then select Specfy an
IP Address. Then configure the following:
a dynamic IP address, then select Obtan an IP Address
Automatcally. If you are required to use a permanent IP
address to connect to the Internet, then select Specfy an
IP Address. Then configure the following:
Specfy an IP Address
This is the Router’s IP address,
as seen from the Internet. Your ISP will provide you
with the IP Address you need to specify here.
with the IP Address you need to specify here.
Subnet Mask
This is the Router’s Subnet Mask, as
seen by users on the Internet (including your ISP). Your
ISP will provide you with the Subnet Mask.
ISP will provide you with the Subnet Mask.
Default Gateway
Your ISP will provide you with the
IP address of the ISP server.
DNS 1-3
Your ISP will provide you with at least one
DNS (Domain Name System) server IP address.
Server IP Address
Your ISP will provide you with the IP
address of the PPTP server.
Username and Password
Enter the Username and
Password provided by your ISP.
Connect on Demand: Max Idle Tme
You can configure
the Router to cut the Internet connection after it has been
inactive for a specified period of time (Max Idle Time). If
your Internet connection has been terminated due to
inactivity, Connect on Demand enables the Router to
inactive for a specified period of time (Max Idle Time). If
your Internet connection has been terminated due to
inactivity, Connect on Demand enables the Router to
•
•
•
•