Cisco 4 Port MIX multichannel T1/E1 PA-MCX-4TE1 Hoja De Datos

Los códigos de productos

PA-MCX-4TE1

Cisco Systems

Page 3 of 4

Port Configured with E1 Features

• E1 120-ohm (G.703) with RJ-48c connectors

• Software-configurable E1 national bits

• HDB3, AMI encoding

• CRC4 and non-CRC4 framing

• Full support for E1 MIB, RFC 1406, including alarm

detection and reporting

• DS0 drop and insert

Full Bit-Error, Rate-Testing Capabilities on

Each E1/T1

• Programmable pseudo-random pattern up to 24-bits

long, including 211-1, 215-1, 220-1, 220-1 QRSS,

233-1, all zeros, all ones, alternating ones and zeros

• 32-bit-error count registers

• Supported Loopbacks

• Line loopback: The T1/E1 stream is looped back at the

LIU toward the network.

• Payload loopback: The T1/E1 data stream is looped

back at the framer toward the network.

• Diagnostic local loopback: The T1/E1 data stream is

looped back at the framer toward the system.

• Remote loopback: The T1 stream is looped back at the

LIU toward the network upon request from the far end

via FDL command.

Network Management Support

• Simple Network Management Protocol (SNMP)

compliant

• Manageable via a MIB browser

• CiscoView interface for configuration

• Cisco Voice Manager (CVM) supported

• Netsys supported

• Country Support

• Approved in most countries

• Software-configurable ring-cadence and

call-progress tones

Ordering Information

Cisco IOS Software Support

The MIX multichannel T1/E1 port adapter is supported

in all Cisco IOS

feature sets starting with Release

12.1(5)T.

Part Number

Description

PA-MCX-2TE1

Two-port MIX multichannel T1/E1 port
adapter with CSU/DSU

PA-MCX-2TE1=

Two-port MIX multichannel T1/E1 port
adapter with CSU/DSU

PA-MCX-4TE1

Four-port MIX multichannel T1/E1 port
adapter with CSU/DSU

PA-MCX-4TE1=

Four-port MIX multichannel T1/E1 port
adapter with CSU/DSU

PA-MCX-8TE1

Eight-port MIX multichannel T1/E1 port
adapter with CSU/DSU

PA-MCX-8TE1=

Eight-port MIX multichannel T1/E1 port
adapter with CSU/DSU