Cisco DC Power supply for Cisco 7603-S PWR-1500-DC= Hoja De Datos
Los códigos de productos
PWR-1500-DC=
Data Sheet
© 1992–2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 5
increased deployment flexibility. Four Gigabit Ethernet ports are available for use in dual-route
processor configurations.
The Cisco 7603-S enhanced chassis delivers numerous design improvements, including:
●
Improved failover mechanisms in the hardware, which when paired with the proper Cisco
IOS
®
Software image can achieve 100-ms failover
●
Ability to deliver higher power of up to 600W per slot
●
High-speed fan tray module on a side-to-side airflow design
●
Better thermal flow measurement and management
The power supply supported on the Cisco 7603-S is the 1500W DC power supply (refer to
Table 1).
Shared port adaptors (SPAs) on the SPA interface processors (SIPs) are available on the Cisco
7600 Series with interface speeds ranging from OC-3 to OC-192 and from Fast Ethernet to 10
Gigabit Ethernet. The Cisco 7600 Series can also use the Cisco 7600 Series/Catalyst
®
6500
Series Enhanced FlexWAN Module to take advantage of most Cisco 7200 and Cisco 7500 port
adapters for terminating DS-0 to OC-3 speeds. By using the Cisco Catalyst 6000 Series of
Ethernet line cards in conjunction with the SIP-based SPAs and the enhanced FlexWAN module,
the Cisco 7600 provides a multitude of options to scale WAN connectivity from DS-0 to OC-192
and LAN connectivity from 10-Mbps Ethernet through 10 Gigabit Ethernet.
The Cisco 7603-S chassis accommodates a broad selection of line cards supporting numerous
applications, including:
●
SPAs and SIPs (Cisco 7600 Series SPA Interface Processor-200 [SIP 200], SIP 400, and
SIP 600):
◦
Channelized T1/E1, Channelized T3, and Channelized OC-3/STM-1
◦
OC-3/STM-1, OC-12/STM-4, OC-48/STM-16 Packet over SONET/SDH (PoS), and OC-
192/STM-64 PoS
◦
OC-3/STM-1 ATM, OC-12/STM-4 ATM, and OC-48/STM-16 ATM
◦
Fast Ethernet, Gigabit Ethernet, and 10 Gigabit Ethernet
●
Enhanced FlexWAN module – Supporting Cisco 7200 and Cisco 7500 WAN port adapters
from DS-0 to OC-3 for Channelized and ATM interfaces and also Fast Ethernet port
adapters
●
High-density Ethernet services modules – 10/100 Mbps, Gigabit Ethernet, and 10
Gigabit Ethernet
●
Services modules – IP Security (IPsec), firewall, distributed denial of service, intrusion
detection, network analysis, and content switching commonly used, for example, in the
Cisco Mobile Exchange solution
●
Supervisor support – Cisco Catalyst 6500 Supervisor Engine 32 (WS-SUP32-GE-3B and
WS-SUP32-10GE-3B), Cisco Catalyst 6500 Series Supervisor Engine 720 (WS-SUP720-
3B and WS-SUP720-3BXL), and the new Cisco RSP 720 (RSP720-3C and RSP720-3CXL)
Understanding the need to use rack space efficiently, Cisco designed the Cisco 7603-S to be a
compact 7-inch-tall (4-rack-unit [4RU]) unit, with single-side connection management for both
interface and power terminations. This setup allows placement of up to 11 Cisco 7603-S units per