Intel Desktop Board DX48BT2 BLKDX48BT2 Manual De Usuario

Ordering Information: See the Intel Web site at www.intel.com.  
For the most current product information, visit developer.intel.com/design/motherbd/

1

 System resources (such as PCI and PCI Express*) require physical memory address locations that reduce available  

  memory addresses above 7 GB. This may result in less than 8 GB of memory being available to the operating system 

  and applications.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR 

IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. 

EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO 

LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR 

USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, 

MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT. 
Intel products are not intended for use in medical, life-saving, or life-sustaining applications. Intel may make changes  

to specifications and product descriptions at any time, without notice.
All products and dates specified are preliminary based on current expectations and are subject to change without 

notice. Availability in different channels may vary.
Intel, the Intel logo, Intel. Leap ahead., Intel. Leap ahead. logo, and Intel Core are trademarks of Intel Corporation in the 

U.S. and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2007 Intel Corporation. All rights reserved. 1207/MS/EC 

318829-001US

Technical Specifications

Power 

Baseboard Power Requirements 
•  ATX12V

Environment

 

Operating Temperature 
•  0° C to +55° C 
Storage Temperature 
•  -40° C to +70° C

Regulations and Safety Standards 

United States and Canada 
  UL 1950, Third edition—CAN/CSA C22.2 
  No. 950-95 with recognized U.S. and Canadian 
  component marks 

Europe 
  Nemko certified to EN 60950 

International 
  Nemko certified to IEC 60950  
  (CB report with CB certificate)
EMC regulations  

(tested in representative chassis) 

United States 
  FCC Part 15, Class B  
  FCC Part 15, Class B open-chassis (cover off) 
  testing  

Canada 
  ICES-003, Class B

Europe  
  EMC directive 89/336/EEC; EN 55022:1998 
  Class B; EN 55024:1998 

Australia/New Zealand 
  AS/NZS 3548, Class B 

Taiwan 
  CNS 13438, Class B 

International 
  CISPR 22:1997, Class B
Power requirements vary. Complies with US CRF  
via EN55022 +6 db in system configurations with  
an open chassis and EU Directive 89/336/EEC  
and use via EN55022 and EN50082-1 in a  
representative chassis.

Lead-Free: The symbol is used to 
identify electrical and electronic  
assemblies and components in which 
the lead (Pb) concentration level in 

any of the raw materials and the end product is not 
greater than 0.1% by weight (1000 ppm). This sym-
bol is also used to indicate conformance to lead-free 
requirements and definitions adopted under the Eu-
ropean Union’s Restriction on Hazardous Substances 
(RoHS) directive, 2002/95/EC.