Foxconn M7VMX-K Socket 775 M7VMX-K Manual De Usuario

33

These items are valid only when "SATA Operation Mode" is set to RAID. They are used to 
enable or disable the RAID function of each SATA port on the motherboard.
The relationships between RAID settings and SATA ports on the motherboard are :
SATA Pri-Master RAID is the SATA port 1 of the motherboard.
SATA Pri-Slave RAID is the SATA port 2.
SATA Sec-Master RAID is the SATA port 3.
SATA Sec-Slave RAID is the SATA port 4.

This item is used to select the operation of your audio controller. You can select [Auto] for high 
defintion audio. Select [Disabled] will turn off audio function.

This item is used to enable or disable the onboard LAN controller.

This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM 
lets you set up a diskless workstation on the network. By installing a boot ROM in the network 
board, you can enable a client PC system on the network to be booted remotely.

Phoenix - AwardBIOS CMOS Setup Utility

OnBoard Devices

    OnBoard Audio Controller 

[Auto]

 

   

Item Help

    OnBoard LAN Controller 

[Auto]

    OnBoard LAN Boot ROM 

[Disabled]

  ↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save

ESC:Exit F1:General Help

←:Move Enter:Select +/-/PU/PD:Value F10:Save

ESC:Exit F1:General Help

:Move   Enter:Select    +/-/PU/PD:Value   F10:Save     ESC:Exit   F1:General Help         

                          F5:Previous Values                        F7:Optimized Defaults

Auto

The Installation procedures for AHCI and RAID drivers are the same, they are :

■  Creating a bootable drive (or RAID array).

Creating a bootable drive (or RAID array).

■  Creating a non-bootable drive (or RAID array).

Creating a non-bootable drive (or RAID array). 

In Chapter 5, only RAID is introduced. AHCI installation is almost the same, the only 
difference is BIOS SATA Operation Mode is set to [AHCI] instead of [RAID].

CA

UT

IO

N