Ideal Networks SignalTEK IICable length meter, R156000 Manual De Usuario
Los códigos de productos
R156000
156810 Iss 2
SignalTEK II
Page 20
User Guide
Tests menu description – Cable mode
When the TESTS icon from the cable mode home screen is selected, Fig 18, the available tests will be
displayed, Fig 19.
displayed, Fig 19.
Fig 18
Fig 19
After any one of the three available tests from the menu is selected, the soft keys RUN and SETUP will
appear:
appear:
Wiremap
When the soft key RUN (F1) is pressed a wiremap test will be run on the cable currently connected to the
tester’s RJ45 port. The settings used for the test will be those that have been preset via the setup menu:
SETUP>TESTS>WIRETEST>WIREMAP.
tester’s RJ45 port. The settings used for the test will be those that have been preset via the setup menu:
SETUP>TESTS>WIRETEST>WIREMAP.
After the test has been run, the display will show a graphical interpretation of the result (Fig 20) and an
indication of the distance to the fault or, the length of the cable. In addition, a FAULT icon and a SAVE
soft key will appear. Select the FAULT icon and the display will show a textual list of the faults detected,
Fig 21.
indication of the distance to the fault or, the length of the cable. In addition, a FAULT icon and a SAVE
soft key will appear. Select the FAULT icon and the display will show a textual list of the faults detected,
Fig 21.
Fig 20
Fig 21