Beha Amprobe Kabelmeter 3000Cable length meter, 2146190 Manual De Usuario

7.1  Saving Measurement Results
" Perform the measurements as described in

chapter 6.2 . The measurement result is indi-
cated on the display. 

" Press the ?? key. The result measured is stored

in the internal UNITEST Cable Length Meter
3000 memory. Additionally, a simple acoustic
signal is audible and the memory location, e.g.
1, is briefly displayed. Furthermore, the symbol
"M” is displayed and indicates that the mea-
surement data has been saved in the internal
memory. 

When the ''Store'' key is pressed again a dou-
ble acoustic signal is audible and indicates that
further check of this measurement is not pos-
sible. After a new measurement new results
can be stored again.

Press

and

keys.

A brief acoustic signal is audible and "0” is briefly
displayed to indicate that the memory has been
cleared. The symbol "M” disappears from the dis-
play.

The cumulative data memory is not influenced by
the clearing procedure. 

Press

and

keys.

An acoustic signal is audible and the last assigned
memory location is briefly displayed.
E.g.: After deleting measurement no. 5 the number
4 is briefly displayed. 

The cumulative data memory is not influenced by
the clearing procedure. 

7.2 Adding and Saving Measurement Results
The UNITEST Cable Length Meter is equipped with
a cumulative data memory enabling the measure-
ment of several cable rings of the same type, and to
perform cumulation of the values.

" Perform the measurements as described in sec-

tion 6.2. The measurement result is displayed. 

" Press

key. The measurement result is

added to the previously stored value in the cu-
mulative data memory (for the first cumulation,
the result is added with 0). The sum of the mea-
surement values is displayed. Additionally, the
symbol "RES” is displayed and indicates that the
measurement data has been stored in the cu-
mulative data memory. 

" Save cumulative data memory entries by press-

ing the

key. The memory location of the

measurement stored is displayed.

The cumulative data memory is cleared when
the measurement range, the table/ reference
levels, or the cable material are changed. The
previously saved sum in the data memory will
not be deleted.

To obtain correct cumulative results, it is im-
portant to only add the same cable types.