Eschenbach 33213 LED Epi Stereo Microscope 33213 Hoja De Datos
Los códigos de productos
33213
- 23 -
Working with LED Ring illumination
Amongst the items supplied is an LED Ring illumination unit for illuminating
the objects being examined by microscope. To use this, proceed as follows:
the objects being examined by microscope. To use this, proceed as follows:
Unscrew the 3 plastic screws
•
s
out of the LED Ring illumination a until
they no longer project in the opening for the lens barrel.
As shown on the right, push the ring illumination
As shown on the right, push the ring illumination
•
a
over the lens barrel
and then secure it by carefully tightening
the 3 plastic screws s.
Insert the power adapter into a correctly
the 3 plastic screws s.
Insert the power adapter into a correctly
•
installed mains power socket and then
connect the plug of the adapter cable with
the socket d on the ring illumination.
Place the On/Off switch of the LED Ring illumination
connect the plug of the adapter cable with
the socket d on the ring illumination.
Place the On/Off switch of the LED Ring illumination
•
f
at the position "I"
to switch the appliance on.
Adjust the required light output with the MAX-MIN regulator
Adjust the required light output with the MAX-MIN regulator
•
g
.
After use, switch the LED Ring illumination off by placing the On/Off
•
switch at the "0" position.
Maintenance and care
For cleaning, do NOT use aggressive chemical substances, solvents or
•
abrasives, these could damage the surfaces.
To avoid soiling of the appliance, make use of the supplied dust protec-
To avoid soiling of the appliance, make use of the supplied dust protec-
•
tion cover when it is not in use.
Should the appliance nonetheless become soiled, clean it with a soft and
Should the appliance nonetheless become soiled, clean it with a soft and
•
lightly moistened cloth.
For cleaning the eyepieces, use a lens cleaning cloth.
For cleaning the eyepieces, use a lens cleaning cloth.
•
Exercise care when cleaning the eyepieces, the upper surfaces can be
•
easily scratched.
By using the supplied hook wrench you can adjust the free movement of
the gearing. On one side of the gear wheel axis there is a small bushing
with corresponding holes. Make the required adjustment by turning it either
clockwise or anti-clockwise.
the gearing. On one side of the gear wheel axis there is a small bushing
with corresponding holes. Make the required adjustment by turning it either
clockwise or anti-clockwise.