Gw Instek PEL-3111 Electronic Load PEL-3111 Hoja De Datos

-320 Storage fault 

[Indicates that the firmware 
detected a fault when using data 
storage. This error is not an 
indication of physical damage or 
failure of any mass storage 
element. 

-321 Out of memory 

An internal operation needed 
more memory than was available. 

-330 Self-test failed 

 

-340 Calibration failed 

 

-350 Queue overflow 

A specific code entered into the 
queue in lieu of the code that 
caused the error. This code 
indicates that there is no room in 
the queue and an error occurred 
but was not recorded. 

-360 Communication error 

This is the generic 
communication error. 

-361 Parity error in program 
message 

Parity bit not correct when data 
received. 

-362 Framing error in program 
message 

A stop bit was not detected when 
data was received. 

-363 Input buffer overrun 

Software or hardware input 
buffer on serial port overflows 
with data caused by improper or 
nonexistent pacing. 

-365 Time out error 

This is a generic device-
dependent error. 

 

Query Errors 

 

-400 Query error 

This is the generic query error. 

-410 Query INTERRUPTED 

Indicates that a condition causing 
an INTERRUPTED Query error 
occurred.