Gw Instek PEL-3111 Electronic Load PEL-3111 Hoja De Datos
Los códigos de productos
PEL-3111
PEL-3000 User Manual
116
2. Press Insert Point[F1] to add a step to the
sequence.
Every-time Insert Point is pressed the Step
parameter is incremented.
parameter is incremented.
The newly inserted ―point‖ becomes the active
step.
step.
3. Set the following parameters for the currently
selected step. See page 115 for configuration
details.
details.
Value
TRIG OUT
4. If you wish to edit a previously added
point/step, use the Steps parameter.
Steps can only be selected after they have
already been added.
already been added.
Steps
0001 ~ 1000(RPTSTEP)
5. The currently selected step can be deleted using
the Delete Point[F2] function.
There cannot be less than 3 steps for fast
sequences.
sequences.
Fill Function
Press FILL[F4] to use the fill function. Set the fill
parameters:
parameters:
Start_Value
End_Value
Start_Step
End_Step
The fill function can be used any number of
times.
times.