Gw Instek GSP-9300 TGSpectrum analyzer, spectrum analyzerBandwidth (RBW) 1 Hz - 1 MHz (1-3-10) GSP-9300 TG Hoja De Datos
Los códigos de productos
GSP-9300 TG
GSP-9300 Programming Manual
30
Reset LAN
It may be necessary to reset the LAN
configuration settings before the LAN can be
used.
configuration settings before the LAN can be
used.
8. Press
System
>More[F7]>RmtInterface
Config[F1]>LAN Reset[F3] to reset the LAN.
9. The GSP-9300 will now automatically reboot.
Note
Each time the LAN is reset, the default
password is restored.
password is restored.
Default password: lxiWNpwd
Configure the WLAN Interface
The WLAN settings operate using any standard 3G USB modem.
For remote locations, using a 3G modem allows you to access the
GSP-9300 web server or to control the GSP-9300 via remote control
commands.
For remote locations, using a 3G modem allows you to access the
GSP-9300 web server or to control the GSP-9300 via remote control
commands.
Background
To use the GSP-9300 as a server using a 3G
modem, you must first obtain a fixed IP address
from a network provider. Each provider will
assign different fixed IP addresses.
modem, you must first obtain a fixed IP address
from a network provider. Each provider will
assign different fixed IP addresses.
WLAN
configuration
Settings
configuration
Settings
IP Address
Default Gateway
Subnet Mask
DNS Server