Gw Instek GSP-9300 TGSpectrum analyzer, spectrum analyzerBandwidth (RBW) 1 Hz - 1 MHz (1-3-10) GSP-9300 TG Hoja De Datos
Los códigos de productos
GSP-9300 TG
REMOTE CONTROL
35
Configure RS232C
Background
The RS232C interface is used for remote control
with a PC.
with a PC.
RS232C
Configuration
settings
Configuration
settings
Baud Rate
Stop bit: 1 (fixed)
Parity: none (fixed)
Data bit: 8 (fixed)
Connection
Connect an RS232C cable from
the PC to the rear panel RS232
port.
the PC to the rear panel RS232
port.
1. Press
System
>More[F7]>RmtInterface
Config[F1]>RS232 BaudRate[F4] to set the baud
rate.
rate.
300
600
1200
2400
4800
9600
19200
38400
57600
115200
RS232C Remote Control Function Check
Functionality
check
check
Invoke a terminal application such as Realterm.
To check the COM port No, see the Device
Manager in the PC. For WinXP; Control panel
→ System → Hardware tab.
Manager in the PC. For WinXP; Control panel
→ System → Hardware tab.
Run this query command via the terminal after
the instrument has been configured for RS232
remote control (page 35).
the instrument has been configured for RS232
remote control (page 35).
*idn?
This should return the Manufacturer, Model