Gw Instek GSP-830Spectrum analyzer, spectrum analyzerBandwidth (RBW) 3/30/300 kHz/4 MHz GSP-830 Hoja De Datos
Los códigos de productos
GSP-830
QUICK
REFERENCE
29
Set Trigger Frequency
Trigger→F5
Run Trigger (in Single/Continuous) Trigger→F6
Display
Change Dimmer Level
Display→F1
Show Display Line
Display→F2
Clear Title
Display→F3→F1
Enter Title
Display→F3→F2 to F4
Show Title
Display→F3→F5
Activate Split Window
Display→F4→F1 (Upper), F2 (Lower)
Alternate Upper/Lower Sweep
Display→F4→F3
Switch Split Display to Full Screen Display→F4→F4
File
Select Copy Source File
File→F1→F1→F1 to F5
Select Copy Destination File
F2→F1 to F5 (After Selecting Source)
Edit Copied File Name
F3 (After Selecting Destination)
Copy Selected File
F4 (After Selecting Source/Destination)
Select File for Deletion
File→F2→F1→F1 to F5
Delete Selected File
F2 (After Selecting File)
Rename File
File→F3→F1
Confirm New File Name
F2 (After Renaming File)
Save Display Image to USB Drive
File→F4→F1→F2
Rename File in USB Drive
File→F4→F1→F1
Select System Code for Update
File→F5→F1→F1
Select Language for Update
File→F5→F1→F2
Update System File from USB Drive F2 (After Selecting File)
Preset
Recall Factory Installed Settings
Preset
System
Save Setup
System→F1→F1 or F2→F3
Recall Setup
System→F1→F1 or F2→F4
Select GPIB Address
System→F2
Show RS-232C Configuration
System→F3→F1 to F4
Activate Auxiliary Signal
System→F4