Gw Instek GSP-830Spectrum analyzer, spectrum analyzerBandwidth (RBW) 3/30/300 kHz/4 MHz GSP-830 Hoja De Datos

Run Pass/Fail test 

This section assumes that the limit line is already defined. 

 

Pass/Fail condition 

 

Checks whether the entire waveform 
amplitude stays between the high limit 
and low limit lines. 

 

 

Checks whether the peak waveform 
amplitude stays between the high and 
low limit lines. 

 

 

Checks whether the waveform valleys 
stay between the high and low limit 
lines. 

1. Select condition 

1.  Press the Limit Line key. 

Limit Line

 

 

2.  Press F5 (Pass/Fail) 

repeatedly to select the 
condition. 

Pass/Fail

2. Run Pass/Fail test 

1.  Press F4 (Pass/Fail On) to 

activate the test. 

Pass/Fail

On    Off

 

 

2.  The test result appears at the 

bottom of  the display. 

 

 

Note 

If  the limit lines are not defined, the Pass/Fail test uses 
the highest or lowest display level as the limit line. 

Save/copy/delete/rename limit line file 

 

Background 

Limit line files can be saved, copied, 
deleted, or renamed using the file 
utility. Press the File key to access 
each function. 

File

 

Save/Copy 

Press F1 (Copy). For detailed steps, 
see page115. 

Copy...

 

Delete 

Press F2 (Delete). For detailed steps, 
see page118. 

Delete...

 

Rename 

Press F3 (Rename). For detailed 
steps, see page120. 

Rename...