Gw Instek PEL-3021 Electronic Load PEL-3021 Hoja De Datos
Los códigos de productos
PEL-3021
PEL-3000 User Manual
54
6. Set the resistance or conductance level
parameters using the scroll wheel and number
pad.
pad.
For Static mode, set CR A Value and/or CR B
Value.
Value.
For Dynamic mode, set Level1 and Level2.
The maximum and minimum conductance/
resistance levels depend on the selected current
range.
resistance levels depend on the selected current
range.
7. To add CV mode to CR mode (CR+CV), see
8. Set the remaining basic configuration settings
such as the slew rate, and switching mode
settings. See page 63 for details.
settings. See page 63 for details.
Display
Mode
CR
I Range
H 35A
V Range
L 15V
Function
Static
Configure
0.000
V
0.000
A
0.00
w
SlewRate
250.000
CR B Value
0.04082
CR A Value
0.04082
LOAD
RS232
A Value
Fine
03/Sep/2012
mA/uS
Ω
Ω
Mode
Current range
Voltage range
Active setting
Conductance/
Resistances
Resistances
Conductance/
Resistance settings
Resistance settings
Note
Basic CR mode configuration is complete. See
page 63 for more configuration options.
page 63 for more configuration options.
The current range and voltage range applies to all
the operating modes.
the operating modes.