Gw Instek PEL-3021 Electronic Load PEL-3021 Hoja De Datos
Los códigos de productos
PEL-3021
PEL-3000 User Manual
64
Level
Time
Level 2
Level 1
Timer1 Timer2 Timer1
Dynamic Mode
Note
Dynamic mode is not available for CV mode.
Operation
1. Make sure the load is off.
2. Press
Main
.
3. Select Dynamic or Static mode with the
Function[F4] soft-key.
A different switching mode can be set for CC,
CR and CP mode.
CR and CP mode.
4. For dynamic mode, set the Timer1 and Timer2
parameters using the scroll wheel and number
pad.
pad.
Timer1 sets the Level1 on-time.
Timer2 sets the Level2 on-time.
Take the slew rate settings into consideration
when setting the timers.
when setting the timers.
The frequency of the dynamic switching is
output via the TRIG OUT BNC.
output via the TRIG OUT BNC.
To select whether A Value or B Value is the
―active‖ setting, press the
―active‖ setting, press the
Shift
+
Preset
keys.
The ―active‖ value will be shown in the
Operation Status Panel.
Operation Status Panel.